Free Nutrition Facts Label Generator (FDA Format, 2020+ Daily Values)

Illustration of a blank nutrition facts panel being assembled on a desk with a pencil, ruler, kitchen scale and fresh ingredients

This free nutrition facts label generator turns the nutrient amounts for one serving into a standard FDA-format Nutrition Facts label. It rounds every value the way 21 CFR 101.9(c) requires, works out the % Daily Values from the current (2020 and later) Daily Values, and shows you which rule produced each number. When you’re done, download the label as a PNG or copy it as HTML.

This nutrition label maker is built for students, teachers, extension educators and small food businesses who want to see how a label is put together. It is an educational aid, not a compliance certification. The limits are explained below the tool.


Nutrition Facts Label Generator

Enter the unrounded amounts per serving from your lab report or recipe analysis. The label applies FDA rounding (21 CFR 101.9(c)) and the 2020+ Daily Values as you type.

Serving

Amounts per serving (unrounded)
Vitamins and minerals (required)
Optional nutrients
Voluntary nutrients
Other vitamins and minerals

How each value was rounded

Nutrient Entered Label %DV Rule

Educational aid, not a compliance certification. This tool draws the standard vertical Nutrition Facts format of 21 CFR 101.9(d) for foods for adults and children 4 years and older, using the rounding rules in 101.9(c) and the Daily Values in 101.9(c)(8)(iv) and (c)(9). It does not cover dual-column labels, tabular or linear formats, small-package or simplified formats, foods for infants or children under 4, or Supplement Facts. The type sizes approximate FDA’s Appendix B graphics. You are responsible for the accuracy of your nutrient data and your final label; check it against the current regulation or a qualified labeling professional.


The nutrition label generator needs JavaScript. The rounding rules are explained in the article below.

How to Use the Nutrition Label Generator

  1. Enter the serving. Type the number of servings per container, the household measure (such as “2/3 cup” or “1 bar”) and the metric weight or volume. The nutrition facts label generator rounds servings per container the way 21 CFR 101.9(b)(8)(i) says: to the nearest whole number, or to the nearest half serving between 2 and 5, with “About” in front when it had to round.
  2. Enter unrounded amounts per serving. Use the numbers from your lab report or nutrient database, not numbers you have already rounded. Rounding twice is one of the most common labeling mistakes.
  3. Add vitamin D, calcium, iron and potassium. These four are mandatory on the current label (21 CFR 101.9(c)(8)(ii)). Leave a field blank and it is treated as zero.
  4. Open “Optional nutrients” if you need them. You can add polyunsaturated and monounsaturated fat, soluble and insoluble fiber, sugar alcohol, a protein quality score (PDCAAS) for protein %DV, and up to four other vitamins or minerals.
  5. Check the table beside the label. It lists what you entered, what the label shows, the %DV, and the rule and paragraph used. Warnings appear if, say, added sugars exceed total sugars.
  6. Download or copy. “Download PNG” makes a 900-pixel-wide image. “Copy HTML” copies the label with its own small stylesheet, so you can paste it into a web page or a course handout.

The nutrition label generator opens with the values from FDA’s own sample label (8 servings, 2/3 cup, 230 calories), so you can compare its output with the example FDA publishes.

Four steps to use the nutrition facts label generator: gather the recipe, weigh ingredients, calculate, and print the label

What the Label Must Contain

The standard vertical format is set out in 21 CFR 101.9(d). In order, from the top:

  • “Nutrition Facts” as the heading, then the number of servings per container and the serving size in bold.
  • “Amount per serving” and Calories, in large bold type.
  • A “% Daily Value*” column heading.
  • Total Fat, with Saturated Fat and Trans Fat indented beneath it; Cholesterol; Sodium; Total Carbohydrate, with Dietary Fiber, Total Sugars and “Includes Xg Added Sugars” indented; and Protein.
  • Below a heavy bar: vitamin D, calcium, iron and potassium, each as an amount and a %DV.
  • The footnote: “*The % Daily Value tells you how much a nutrient in a serving of food contributes to a daily diet. 2,000 calories a day is used for general nutrition advice.” That is the wording in 101.9(d)(9), which the generator uses. FDA’s sample graphics add “(DV)” after “% Daily Value”.

Only the headings, the names of the non-indented nutrients, and the %DV figures for those nutrients are bold (101.9(d)(1)(iv)). The vitamin and mineral percentages are not.

How the Generator Rounds Each Value

FDA doesn’t let you print raw lab numbers. Each nutrient has its own rounding increment, and some have a cut-off below which the amount is declared as zero or as “less than”. The main ones:

Nutrient Rounding rule Paragraph
Calories Under 5: may be 0. Up to and including 50: nearest 5. Above 50: nearest 10. 101.9(c)(1)
Total, saturated, trans fat Under 0.5 g: 0. Under 5 g: nearest 0.5 g. 5 g and up: nearest 1 g. 101.9(c)(2)
Cholesterol Under 2 mg: 0. 2 to 5 mg: “less than 5 mg”. Above 5 mg: nearest 5 mg. 101.9(c)(3)
Sodium Under 5 mg: 0. 5 to 140 mg: nearest 5 mg. Above 140 mg: nearest 10 mg. 101.9(c)(4)
Carbohydrate, fiber, sugars, added sugars, protein Under 0.5 g: may be 0. Under 1 g: may be “less than 1 g”. Otherwise nearest gram. 101.9(c)(6), (c)(7)
Vitamins and minerals (%DV) Nearest 2% up to 10%, nearest 5% up to 50%, nearest 10% above 50%. 101.9(c)(8)(iii)

For a full explanation with edge cases, and a tool that checks your own label line by line, see our FDA rounding rules checker.

Where the regulation offers a choice, the nutrition facts label generator picks the form most labels use: “0g” below 0.5 g, “<1g” from 0.5 g to under 1 g, and “<5mg” for 2 to 5 mg of cholesterol. 21 CFR 101.9(d)(7)(i) allows the “<” symbol in place of “less than”.

How %DV is calculated

For fat, saturated fat, cholesterol, sodium, carbohydrate, fiber and added sugars, %DV is the amount divided by the Daily Value, rounded to the nearest whole percent (101.9(d)(7)(ii)). The rule lets you divide either the declared (rounded) amount or the actual amount. The nutrition label generator uses the declared amount, so the label is internally consistent (8 g of fat shows 10%, not a figure based on 8.3 g). For “less than 1 g” values it uses the actual amount.

Protein %DV is optional unless you make a protein claim. If you include it, it must be based on protein corrected for quality: protein × PDCAAS, divided by 50 g (101.9(c)(7)(ii)). Enter a PDCAAS under “Optional nutrients” to show it. For the full list of Daily Values, see our percent daily value calculator.

Vitamin and mineral amounts

The regulation says vitamin and mineral amounts use the units and “levels of significance” of the RDI table. FDA’s 2019 guidance turns that into increments: vitamin D and iron to the nearest 0.1, calcium and potassium to the nearest 10 mg, and so on. The nutrition label maker follows that guidance. That’s why FDA’s 2016 sample value of 235 mg potassium appears as 240 mg here. The guidance is nonbinding, but it is FDA’s stated current thinking.

How to Make a Nutrition Label with the Nutrition Facts Label Generator: A Worked Example

The quickest way to learn how to make a nutrition label is to follow one product from raw numbers to a finished panel. The figures below are for an illustrative oat and honey granola bar, not a real product. Assume a recipe analysis gave these unrounded amounts for one 40 g bar, and that the box holds 6 bars.

Step 1: Enter the serving information

Type 6 for servings per container, “1 bar” for the household measure and 40 g for the metric weight. Six is a whole number, so the label reads “6 servings per container” with no “About”. If the count had come out at 6.2, for example from dividing a bag’s net weight by the serving weight, the nutrition label generator would round it to the nearest whole number and show “About 6 servings per container”.

Step 2: Enter the unrounded amounts

Enter each amount exactly as your analysis reports it, with all its decimals. The table shows what the nutrition facts label generator does with each one.

Nutrient Entered Label shows %DV Why
Calories 176.4 180 none Above 50: nearest 10
Total Fat 6.7 g 7g 9% 5 g and up: nearest 1 g; 7 ÷ 78 g = 9.0%
Saturated Fat 1.24 g 1g 5% Under 5 g: nearest 0.5 g; 1 ÷ 20 g = 5%
Trans Fat 0.03 g 0g none Under 0.5 g: declared as zero
Cholesterol 0 mg 0mg 0% Under 2 mg: zero
Sodium 96 mg 95mg 4% 5 to 140 mg: nearest 5 mg; 95 ÷ 2,300 mg = 4.1%
Total Carbohydrate 27.6 g 28g 10% Nearest gram; 28 ÷ 275 g = 10.2%
Dietary Fiber 2.6 g 3g 11% Nearest gram; 3 ÷ 28 g = 10.7%
Total Sugars 11.3 g 11g none Nearest gram; no Daily Value
Added Sugars 8.4 g Includes 8g Added Sugars 16% Nearest gram; 8 ÷ 50 g = 16%
Protein 3.7 g 4g not shown Nearest gram; no PDCAAS entered, so no %DV
Vitamin D 0 mcg 0mcg 0% Nothing entered is treated as zero
Calcium 31 mg 30mg 2% Nearest 10 mg; 31 ÷ 1,300 mg = 2.4%, nearest 2%
Iron 1.04 mg 1mg 6% Nearest 0.1 mg; 1.04 ÷ 18 mg = 5.8%, nearest 2%
Potassium 132 mg 130mg 2% Nearest 10 mg; 132 ÷ 4,700 mg = 2.8%, nearest 2%

Two details are worth noticing. The fat, sodium, carbohydrate, fiber and added sugars percentages come from the declared (rounded) amounts, so anyone checking 7 g against 78 g gets the same 9% that the label shows. The vitamin and mineral percentages come from the amounts you entered and then follow the 2%, 5% and 10% steps.

Step 3: Check the warnings and the arithmetic

Read the rounding table beside the label line by line. The nutrition label maker also compares calories with a rough estimate from 4 calories per gram of carbohydrate and protein and 9 per gram of fat, and warns you when the two disagree by more than 20% and more than 10 calories. Here the estimate is about 186 calories against the 176.4 entered, so no warning appears. A large gap usually means a typing error or a value entered per 100 g instead of per serving.

Step 4: Export and review

Download the PNG or copy the HTML, then compare the result with the rules in 21 CFR 101.9 or have a labeling professional review it. The worked example produces a draft; the final responsibility for the numbers and the artwork stays with you.

What This Generator Does Not Cover

Being clear about this matters more than any feature:

  • Other formats. Dual-column labels (per serving and per package, 101.9(e)), tabular and linear displays for small packages, and the simplified format are not generated.
  • Other groups. Foods for infants through 12 months and children 1 through 3 years use different Daily Values and formats. Foods for pregnant or lactating women use different RDIs. Everything here is for adults and children 4 and older.
  • Dietary supplements. Supplements use a Supplement Facts panel under 21 CFR 101.36, not a Nutrition Facts label.
  • Your data. The nutrition label generator can’t check that your nutrient values are right. FDA checks declared values against laboratory analysis using the compliance rules in 101.9(g). Our article on how Nutrition Facts are verified explains how that works.
  • Exact typography. The label approximates the type sizes and rules in FDA’s graphic specifications (Appendix B to Part 101) on screen, and the PNG is a raster image. Your printer or designer should set the final artwork.
  • Exemptions and claims. It doesn’t tell you whether your business is exempt from nutrition labeling, or whether a claim like “low fat” is allowed.

Where to Get Accurate Nutrient Values

Any nutrition label generator is only as good as the numbers you feed it. There are two broad routes.

  • Laboratory analysis. A lab tests a sample of the finished product. This measures what is actually in the food after mixing, cooking and packing, which matters because FDA checks declared values against laboratory analysis under the compliance rules in 101.9(g).

  • Database calculation. You add up the nutrients of each ingredient from a nutrient database and divide by the number of servings. It is cheaper and faster, but only as reliable as the ingredient entries you choose and how closely they match what you actually buy. FDA’s guide to developing and using databases for nutrition labeling explains this approach.

Whichever route you use, enter the amount per serving of the finished food. If baking or cooking drives off water, a recipe total divided by the raw ingredient weight will not match a serving of the finished product, so base the serving on what the customer actually eats.

Common Mistakes When Using a Nutrition Label Maker

Most errors on a homemade label come from the inputs rather than the layout. These are the ones to watch for with any nutrition label maker, including this one:

  • Rounding before you enter. Enter the unrounded numbers. If you round 0.46 g of fat to 0.5 g first, the label will show 0.5g instead of 0g.

  • Mixing up the basis. Lab reports often give values per 100 g. Convert them to the serving size before you type them in.

  • Added sugars larger than total sugars. Added sugars are part of total sugars, so they can’t be larger. The free nutrition label generator flags this, but it can’t tell which of the two numbers is wrong.

  • Leaving the mandatory vitamins and minerals blank. Vitamin D, calcium, iron and potassium must appear on the current label. A blank field is treated as zero, so check that a zero is really what you mean.

  • Using old Daily Values. Percentages copied from an older label or an old spreadsheet may use the pre-2020 Daily Values. The generator uses the current ones, such as 2,300 mg for sodium and 28 g for dietary fiber.

  • Using the wrong panel. Dietary supplements need a Supplement Facts panel under 21 CFR 101.36, and foods for infants and children under 4 use different Daily Values. A standard nutrition facts label generator is not the right tool for either.

Checklist Before You Print

Before a label made with the nutrition label generator goes anywhere near packaging, run through this list:

  1. The serving size and servings per container match the product and the package.

  2. Every amount was entered unrounded and per serving.

  3. The rounding table shows no warnings you haven’t explained.

  4. Vitamin D, calcium, iron and potassium all have real values, not blanks you forgot.

  5. Calories are close to the 4/4/9 estimate from fat, carbohydrate and protein.

  6. Your format is the standard vertical one. If you need a dual-column, tabular, linear or simplified label, this tool does not produce it.

  7. A printer or designer will set the final artwork to FDA’s graphic specifications, and someone familiar with 21 CFR 101.9 has reviewed the values.

Small food business owner using a free nutrition label generator for packaged jars

Frequently Asked Questions

Is this nutrition label generator really free?

Yes. It is a free nutrition label generator: there’s no sign-up, and nothing you type is sent anywhere. The calculations run in your browser.

Can I print this label on my product?

You can use the nutrition label maker as a starting point, but you are responsible for the label. Check the values and the layout against 21 CFR 101.9, and for a commercial product consider a review by a labeling professional. The PNG is fine for a draft or a class handout. For packaging, have the artwork set to FDA’s specifications.

Where do I get the nutrient values?

From a laboratory analysis of your product, or from a nutrient database calculation of your recipe. FDA’s guide to developing and using databases for nutrition labeling explains the database approach.

Why does my label show “0g” when I entered 0.4 g?

Because the rules require it. Fat under 0.5 g must be declared as zero, and carbohydrate, sugars, fiber and protein under 0.5 g may be. The rounding table beside the label shows the rule for every line.

Does it use the old or the new Daily Values?

The current ones, from the 2016 final rule that most manufacturers had to follow from January 1, 2020 (smaller manufacturers from January 1, 2021). For example, the sodium DV is 2,300 mg and the dietary fiber DV is 28 g. Our article on how the FDA changed the Nutrition Facts label explains what changed.

Can I make a nutrition label for a recipe I sell at a farmers market?

You can use the nutrition label maker to draft one from a recipe calculation or a lab report. Whether your product needs a Nutrition Facts label at all, or qualifies for an exemption, is a separate question this tool doesn’t answer. Check FDA’s guidance or ask a regulatory specialist.

Why is the %DV on my label different from my own calculation?

21 CFR 101.9(d)(7)(ii) lets you divide either the declared amount or the actual amount by the Daily Value. The nutrition facts label generator uses the declared amount for fat, sodium, carbohydrate, fiber and added sugars, so 8 g of fat shows 10% even if the unrounded figure was 8.3 g. If you divided the unrounded amount, your answer can differ by a percent.

What happens when a vitamin or mineral is under 2% of the Daily Value?

The regulation gives options for amounts below 2% of the RDI, such as declaring zero, using an asterisk with a “Contains less than 2 percent of the Daily Value” statement, or, for vitamin D, calcium, iron and potassium, a “Not a significant source” statement. The generator always prints the rounded amount and percentage and does not write those statements for you.

Can I use this as a free nutrition label generator for a dietary supplement?

No. Supplements use a Supplement Facts panel under 21 CFR 101.36, which has a different layout and rules.

Is the Nutrition Facts panel the only thing a food label needs?

No. Learning how to make a nutrition label covers one panel: the rounding, the Daily Values and the standard layout. A packaged food label has other required parts, which our article What Has to Be on a Food Label? walks through. Claims such as “low fat” have their own rules too, and this tool doesn’t check them.

Link to This Tool

Teachers, extension programs and health departments are welcome to link to this nutrition facts label generator. A plain-text citation you can paste into a reading list or handout:

Compliance Naturally. Nutrition Facts Label Generator (FDA 21 CFR 101.9 format). https://compliancenaturally.com/nutrition-facts-label-generator/

No embed code is needed. A link to this page always points to the latest version, with any rule updates.

Sources

Related Articles